Analog to Digital TV Conversion - Comments Page 4

Category: Television




(Read the article: Analog to Digital TV Conversion)

All Comments on: "Analog to Digital TV Conversion"

Comment Page:  1  |  2  |  3  | 4 |  5 

Posted by:

Rick
16 Mar 2009

If I purchase a dvd/vcr with digital tuner will that replace my converter box and will I be able to record different stations at at different time slots using the timer.

EDITOR'S NOTE: I don't think it will replace the converter, but you can try it. The recording question depends on the features of the dvr/vcr that you buy.

Posted by:

Anna
08 Apr 2009

I, too, just bought a digital converter. Guess what, I get 2 of the 5 channels I got before. And I don't get sound on either of them. Now, I'm told I have to buy an outside aerial antenna (which my landlord won't let me install) in order to get the other channels, and even then it's not guaranteed to give me any sound. This sounds like the TV manufacturers planned this crazy mixed up situation all along.

EDITOR'S NOTE: You may be premature on this... the digital cutover won't happen until June 12th, so some of those stations may not be broadcasting in digital yet. If you bought a converter that lacks the "analog passthru" option, you will get ONLY the channels that are broadcasting in digital.

Posted by:

linda
09 Apr 2009

Is there any hope at all for my little battery operated Sony portable TV? I love that little thing, I can take it anywhere. But I have a feeling it will be completely useless once this digital conversion happens and that makes me sad.

EDITOR'S NOTE: If it has a connector for an external antenna, yes. Otherwise, no.

Posted by:

Caz
28 Apr 2009

I had a local outdoor antenna attached when I had satellite service years ago. I disconnected the service about three years ago but the local antenna still worked great. Now I cannot get my VCR/DVD player to work in color. I have made no changes to the connections at all. I have a two year old HD ready plasma TV. Do I need to upgrade my DVD player now?

Posted by:

Charlie Knight
06 May 2009

Let's face the truth, Digital TV is a failure.

Unless you live very close to a transmitting station they are NOT using the power needed. My lady friend is in a rural area and she now gets a fairly herringbone video and some audio from the anilog broadcast on her HDTV she just bought. The old cheap tv did a better job. Soon she will get NO signal as she has the new TV but the signals are not sent out with enough strenght.

I am living in a large city and have the converter box and UHF antenna and amplifier, but most of the time the signals drop out, and I am only a few miles away from some of the stations.

I am just accepting the fact that by the end of June Television will be a thing of the past and I will need to get my information via the internet.

As far as I can see this has been one great big failure. My friend has spent $400 or more and she gets nothing. I have only spent about $125 in upgrade stuff and my signal breaks up and is useless.

Let's just admit it. TV is dead the end of June.

It was nice while we had it, but soon it will be gone. What's more, of the so called 8 channels I get only 3 are worth looking at and only one, the weather thing with background music, is solid at least 55 percent of the time.

Yup, TV is dead.

Posted by:

michael
06 May 2009

I want to say there is a solution to the problems people are having why cant they have both digital and anolog tv.my opinion the goverment has wasted the money for converter boxes why mess with something that has work for years its just someone trying to get rich off a sceam my opinon digitals not better, digital should stay on satilite and cable leave americas tvs alone please let americans vote on it anolog would win by a landslide.

Posted by:

gene_g56
10 May 2009

The DTV switch is going to be a hit and miss situation based on particular locations, terrain, and distance from the transmitter.
I live about 22 miles from the stations I receive. I used to get ABC and FOX via analog with an indoor antenna now with digital I get ABC,FOX,CBS,PBS(3),The CW,and MY TV network. I put an outdoor antenna on my back porch aimed to give the best reception possible (a compromise) for all of the stations and a 12db amp.
I get great signal on all of the eight stations on one TV (I am using only an amplified "loop" in the bedroom and have problems with two of the eight there).
I have noticed that like Satt TV digital signal does not like stormy weather and even on a clear day if it is windy (over 15mph) the signal is affected (transmitter tower sway?).
My biggest complaint is about the stuttering and audio looping that happens from time to time. The only way to correct this is to turn the TV off and then back on. I thought this was a problem on only one channel at first but it has happened on several, signal strength does not seem to be a factor. Also I never had this problem until I switched from analog sets with converter boxes to 720p digital TV's.

Posted by:

John Williams
15 May 2009

The Digital switchover is coming next month.
i live in macon ga it only one analog station lift on. it a cbs station its been on since 1953.
but the abc nbc fox and pbs as went to digital tv. i been watching analog tv since the 1970's.

Posted by:

Jackie
04 Jun 2009

We have a small television in our kitchen. There is no cable jack for this television. Should we purchase a standard analog-to-digital converter box, or is a wireless converter box available?

EDITOR'S NOTE: If your TV has an external antenna connector, you will be able to use an analog-to-digital converter box. I'm not aware of any similar wireless devices. If your TV has a built-in internal antenna, you're out of luck, unless you're handy with a soldering iron.

Posted by:

John Sobolewski
08 Jun 2009

When the stations convert over to the digital signal, and shut down the analog signal, will the signal power of the digital signal be increased,or will it remain the same as when they were broadcasting the two seperate signals???

Posted by:

Mike S. Morgan
10 Jun 2009

I have two TV sets for which I have convertors. Is there a way I can connect my convertors and connect my DVD/VCR players simultaneously, and switch functions accordingly? Is there another device I must purchase to make this possible- as there are provisions for only ONE set of three color cables on each respective television set?.

Posted by:

Ruth Walters
11 Jun 2009

I set up my converter box to my tv with a built in VCR. The VCR records fine if I push the button, but my timer recordings only record in black with no sound. I'm not sure why it records manually but not on the timer. HELP!

Posted by:

Garland Bauch
15 Jun 2009

A friend has a small portable analog TV that appears to have a built-in antenna. The converter box co-ax output to the TV input brings up a screen that says No signal. Can you plug a rabbit ears TV antenna into the converter box to get a signal without disconnecting the built in antenna. Or can you connect the built in antenna to the input co-ax on the convert box.

EDITOR'S NOTE: I suppose it depends on how the TV is wired. Experiment!

Posted by:

Gram
15 Jun 2009

Why am I seeing the message "digital signal is low" on channels that previously had no difficulty reaching my inside antenna, broadcast- only televisions? The transition has cut my channel list almost in half.

Posted by:

Darius
16 Jun 2009

Although the images are better than the analog broadcasts, still, this is too much a hassle.

And converters are not the same. some converters can pull in signals better than others. But the biggest pain is that the signals are unstable. Say, you were able to pull in Channel 7.1 if you move to another Channel then go back to Channel 7.1 later, you won't get the signal for Channel 7.1 anymore. You'll have to tweak, rotate, and move the antenna sideways, back and forth to get the signal again.

And signals from some stations are difficult to pull in. The most difficult channels to pull in are the CBS 2 and My13 TV. Followed by NBC 4 and CW 5 then 11. In the order most difficult to difficult Easiest is 7.1, 9.1.

If some stations get low ratings it is not because viewer don't want to watch them, it is because there is "NO SIGNAL".

Posted by:

jbmccarthy
16 Jun 2009

I bought an antenna and converter box months ago, and on June 12 at 7:OO AM I scanned my TV and all was well, except I did not have channel 13. Unable to scan at that time, I came back later and re-scanned. No channels were strong enough to scan! I now have zip, zero, nada channels. If this is another example of how well the government is going to "take care of us" cradle to grave, we are in deep, deep trouble!

Posted by:

Joe
30 Dec 2009

I was there in the early 1970s when cable TV was started; it was $9.95 per month and NO commercials. After enough people got hooked the commercials started then the rate increases came. I started with satellite TV in 1998 when it was $19.95 per month. Every six months they raised the price until it reached $54.95 per month. Then I dropped it and went back to antenna TV.

Then the free over the air TV went to a digital signal this June. I live in Daytona Beach and we get our TV from the Orlando stations. The digital signal comes and goes. Some days I get every channel clear and sharp, other days I am lucky to get one channel. Right at the most important moment the signal will click off and might be gone for the rest of the night. OTA digital TV is a disaster.

The TV providers probably don’t care about the millions of antenna users because we are the poor. The loss of 5 to 10% of their market does not seem to worry them. The other 90% will pay and pay, not worrying one little bit about the cost, $10 a day, no problem those suckers will pay it.

As for me and several million others just like me if the credit card companies wanted to charge me to use their product I will stop using them and I WILL STOP USING THE TV. Back to a good book.

Posted by:

cindy noffsinger
05 Mar 2010

WE would like to continue to get free antenna broadcasting. Not all of us can afford to pay for cable t.v. or even need it.

Posted by:

phyllis
26 May 2010

I have a BW portable TV and a hand-held LCD TV and can't get reception because they are both analog. Is there anything on the market to convert this type of equipment to digital?

EDITOR'S NOTE: If they can use an external antenna, you'll be able to use the digital-to-analog converter.

Posted by:

robert clive reynolds
05 Aug 2010

bob,I have purchased a pinncal dazzle dvd recorder so as I can transfer digital movies from the memory card of my samsung camcorder on to dvd's that will play on tv dvd combies & standard dvd players,this piece of equipment has worked superbly and has produced first class analog copies of our holiday that play on all my required dvd players, the only problem I have is being able to make a copy of one of these dvd's using disc to disc copy, each time I try the copied dvd it will not play on the players as will the dvd burned through the dazzle??

EDITOR'S NOTE: When you copy the disc, do you "finalize" it? Some software does not do that, and it often causes such problems.

Comment Page:  1  |  2  |  3  | 4 |  5 

Read the article that everyone's commenting on.

To post a comment on "Analog to Digital TV Conversion"
please return to that article.

Send this article to a friend. Jump to the Comments section. Buy Bob a Snickers. Or check out other articles in this category:





Need More Help? Try the AskBobRankin Updates Newsletter. It's Free!

Prev Article:
Ubuntu Linux Gutsy Gibbon
Send this article to a friend
The Top Twenty
Next Article:
Free Online Word Processors

Link to this article from your site or blog. Just copy and paste from this box:



Free Tech Support -- Ask Bob Rankin
Subscribe to AskBobRankin Updates: Free Newsletter


About Us     Privacy Policy     RSS/XML