Convert VHS to DVD - Comments Page 3
|
Posted by:
|
I understand that in order to convert a VHS tape with a copyright i need to get a stabilizer. I'm in Canada and i have checked quite a few websites and dont seem to find it anywhere. I see them on US websited but they are way over my budget. Someone mentioned connecting my VCR to my TV and then connecting my TV to my dvd recorder and recording it directly off the TV. I was under the impression that TV's only have input connections and no outputs. Am i right on thinking that? I have a Panasonic DVD recorder and it has 2 inputs and one output. But i only see inputs on my Sony TV. How can i convert my kids Disney movies to DVD for personal use only? EDITOR'S NOTE: Sounds like you'll need a different TV with Video Out ports. But I'm not sure that will even work. |
|
Posted by:
|
To copy Macrovision protected VHS tapes (Disney, etc) use a VHS player from a country that does not have companies that own movie studios. Think Samsung (South Korea) and not Sony (Japan). EDITOR'S NOTE: Are you saying that Samsung players do not respect the copy protection signal? Do you know for sure that this works? |
|
Posted by:
|
Hi- I can record from VHS to DVD ok but some recordings result in a "Jitery" picture(wavy areas) also apparent in the monitor(TV screen) while I'm recording. Is this a part of the "anti-copy" process on some VHS tapes or another issue? Would buying the Sima part(GoDVD!)from Best Buy/Circut City fix this? Thanks in advance for a reply. EDITOR'S NOTE: If the jittery picture only appears when you're trying to record, then it seems likely. |
|
Posted by:
|
Just find a good older VHS machine. The manufacturers were not forced to install Macrovision on their machines until some point in the mid-90s. Though some did voluntarily before they were forced to, not all of them did. I had a late 80s VHS vcr that would record content with Macrovision with no problems. I had to buy a new VCR in about 1996 after that one died, and it did have Macrovision detection, and I was unable to do tape-to-tape transfers after that if the source tape had Macrovision. |
|
Posted by:
|
hello, i'm also looking for the solution for the disney copyright thing, and i have seen the solution for the gadget you put between your vrc and your dvd player but i have one of those dual units that has the vcr and the dvdr in he same unit. will the stabilizer/sima thing work for me too? or is there ANY other way to do it? Help! i just want some little mermaid! :) EDITOR'S NOTE: No, that device will not work with a combo unit. |
|
Posted by:
|
Regarding the longevity of the new digital media. Working in a museum, I too am skeptical of our ability to reproduce obsolete technology in the future. Has anyone tried taking a turn-of-the-century cylinder record to a service bureau for copying? Good luck! Most archivists and document specialists despair of having any records of the 21st century for just this reason and still stand by microfilm as the best message of preservation. |
|
Posted by:
|
I'm finally taking the time to preserve my videos to DVD. They range from 8mm family movies from the 60s to VHS-C videos and MinDVs. I have a mechanical converter to play the VHS-C sized videos but am noticing a lot of them are not tracking correctly. The newer VHS players dont having manual tracking available so do I have to hunt down an old one or is there a way to correct this? I want to copy to DVD but I cant copy them all "mal-tracking" like this...any suggestions? Is there a really good recording VHS/DVD unit that can do this easily for my technochallenged self? |
|
Posted by:
|
I just purchased a Sony VX525 DVD Recorder/VCR Combo and am trying to combine content from multiple VHS tapes onto a single DVD. Is this possible? I am using DVD+R discs, and I have not finalized my disc yet. I thought it would be simple to do but my record features go away when I take out my VHS tape and insert a new one. Thanks for your thoughts. |
|
Posted by:
|
I have a vice 1000 macrovision remover and it did not work on a Disney pal VHS on 2 DVD players I had. |
|
Posted by:
|
please help me! i had the honestech vhs to dvd converter 3.0 deluxe, and it's the best thing ever.. i can do whatever i want with it,, but the problem is, i changed my PC to a MAC.. nfortunately, my software doesnt work for a mac. now i cant find a software that is similar to the honestech vhs to dvd that i had. i tried eyeTV and all that, but it's not what i want, because it catches on signal channels and program guides and such, and i dont want that. i want something that wud record my TV to my computer, without the signal program guide thing.. just directly. so when i watch a VHS and its on my tv screen, i can record that. pleaseeeee helpppp! just a MAC software that records LIVE tv, not depending on the programming channels stuff.. just direct from my TV. pleaseeeeeeeeee helpppp!! EDITOR'S NOTE: You could try running Windows on your Mac desktop. See http://askbobrankin.com/run_windows_on_mac.html |
|
Posted by:
|
I am looking for a VHS TO DVD converter and I want to know what is the best kind to buy for less then 100$? |
|
Posted by:
|
I have a Sylvania vcr/dvd recorder combo. I have to use the 2x or 4x dvds (hard to find now) but I just copied some old home movies and it plays fine on the Sylvania but my computer and other dvd players won't recognize it. Does anyone know why? EDITOR'S NOTE: Some recorders don't "finalize" the disc after recording. There may be a way to force it to do so, check your manual. |
|
Posted by:
|
Like Hannah, who posted on 13 Sept. 2007, I'm looking for a good quality VHS to DVD converter for a G-4 Mac and similarly would like a sort of best buy for less than 100$ if at all possible. EDITOR'S NOTE: The Video Xpress product from ADS Tech (see link above) seems like a nice solution for $49. |
|
Posted by:
|
To Shreed on 8/4/07. I found that when you record the VHS tape to CD and want to put another VHS tape in and continue on the same CD; don't finalize and start over with the commands to load the 2nd VHS tape and it will continue recording on the CD. When the CD is full you can finalize. Just watch the amount of time you set up for the CD i.e. 6 hours or 4 hours. |
|
Posted by:
|
I have a DVD that had been copied from a VHS copyrighted tape some time ago. I have been successfully playing it on my old DVD/VHS combo player. However, I now have a new DVD player imbedded in a TV, and the disc will no longer play. Is this a copyright issue, or is something else going on? I am able to play new DVDs with no issues. EDITOR'S NOTE: Some DVD recorders do not "finish" or "finalize" the disc. Perhaps that is the problem. |
|
Posted by:
|
I used a similar LG combo recorder like null from May 9th 2007, and also experienced problems, but not due to human error. After a few successfully burned discs, the recorder failed to finalize the discs, yet I managed to restore the content using isoBuster, which saved me a lot of seemingly wasted hours of recording. Since the discs were physically OK, it was no problem converting the data into vob files, which were converted and encoded, making every 3 'finalize failed' discs into one! |
|
Posted by:
|
I have purchased a 2000 Ford Windstar, in reviewing the vehicle's features, I found that it has a VCR with a pop up screen, and it also has a 6 disc cd changer, my question is....Is there something (without spending a lot of money) that I can plug into the VCR, and be able to play DVDs. If so someone please let me know, I have VHS tapes and DVD's. Please let me know. Thank you... EDITOR'S NOTE: I think your best bet is a portable DVD player. |
|
Posted by:
|
The "Black Box" solution above looks most practical for my needs, but alas, it seems the ADSTech versions are not compatible with Vista. Does anyone know of another company that makes a similar (and Vista compatible) product? EDITOR'S NOTE: It might be helpful to ask them before assuming they're NOT compatible... |
|
Posted by:
|
Can anyone confirm using the Sima ct 200 to overcome the Disney copyright (personal use). I really would like my son to have the movies to watch in the car. I just want to make sure it will work before I make the investment. Any other suggestions are welcomed. |
|
Posted by:
|
Does anyone know if i can connect the VCR to my computer and burn a DVD that way? If so, how? EDITOR'S NOTE: Not directly... see Using a Black Box in the article above. |
Read the article that everyone's commenting on.
To post a comment on "Convert VHS to DVD"
please return to that article.
| Need More Help? Try the AskBobRankin Updates Newsletter. It's Free! |
![]() |
Prev Article: Should I Buy Anti-Spyware or Anti-Virus Software? |
|
Next Article: Best and Worst Video Games |
![]() |
|
Link to this article from your site or blog. Just copy and paste from this box: |
|
Free Tech Support -- Ask Bob Rankin Subscribe to AskBobRankin Updates: Free Newsletter About Us Privacy Policy RSS/XML |

Check out other articles in this category:



(Read the article: Convert VHS to DVD)